Carregando... Aguarde...
Toda Loja em 1x sem juros, parcelamos em até 1x no cartão.

Bem vindo usuário, (Clique aqui para entrar ou crie uma nova conta)
O que você Procura?
Home BAIXOS BANJO CABOS CAIXA CAPTADORES CASES Compressores Computador Controlador CUBO de Guitarra Discos Lps Cds Dvds DVD ESTANTE FOTOGRAFIA GUITARRA HEADPHONE home theater IN EAR monitor de orelha INTERFACES MIDI LAMPADA MICROSYSTEM MIXER DE VIDEO MIXERS Orchestral Pedal de efeitos PROCESSADOR FM Receiver SAMPLES SEQUENCER SUBWOOFER TECLADOS / SINTETIZADORES wind controller
  • Imagem 1


Compartilhe este Produto
Bookmark and Share

Mixer shure M267 series preamp vintage na sommexe celzap 21 - 964661433

Codigo do Produto:
Avaliação dos Clientes: ( )
Frete: Calcular ao finalizar

Preço: R$ 1.000,00
ou em até 1x de
R$ 1.000,00 sem juros
Quantidade:
Descrição do produto

 Shure M267 - Microphone Mixer-Remote Amplifier
The Shure M267 is a microphone mixer-remote amplifier specifically designed for professional applications. The excellent performance, versatility and features of this complete, compact console make it an ideal choice for studio, remote, or sound reinforcement use, and as an add-on mixer for expanding existing facilities. It is also ideally suited for use with audio and video tape recorders to provide multiple microphone inputs.

 

 

Shure M267 Microphone Mixer

Specification Sheet

GENERAL
The Shure Model M267 is a microphone mixer-remote amplifier specifically designed for professional applications. The
excellent performance, versatility and features of this complete, compact console make it an ideal choice for studio, remote, or sound reinforcement use, and as an add-on mixer for
expanding existing facilities. It is also ideally suited for use with
audio and video tape recorders to provide multiple microphone
inputs.

















Wide, flat frequency response and extremely low distortion up to +18 dBm output
Extremely low noise and RF susceptibility
Four switchable microphone- or line-level balanced-line inputs with individual gain controls and low-frequency rolloff
switches. MUMETAL shielding on input transformers
Feedback-type input gain controls for maximum clipping
levels and dynamic range
Output switchable for line or microphone level
Built-in switchable peak limiter cuts output overload distortion, adapts to power supply voltage
LED indicator shows limiter operation or overload with
limiter defeated
Externally adjustable limiter threshold (–4 to +18 dBm)
VU meter calibrated for +4 and +8 dBm with range
switch. Illuminated with ac operation
Ac or built-in battery operation. Noiseless automatic
switchover to battery in case of ac line failure. Battery
test without program interruption
Front-panel headphone level control and monitor jack
drives almost any stereo or mono headphones; output
can be additional unbalanced line feed to drive a tape recorder or power amplifier
Direct mix bus for stacking units
Automatic muting prevents speaker damage during
turn-on and -off
Low distortion, high-stability tone oscillator for line test
and level checks

FOD NO. 09055
1997, Shure Brothers Incorporated

All connections phased. Line output terminals phase-indicated



Compact and lightweight, with rugged, abrasion-resistant case



Internally selectable 120 or 240 Vac, 50/60 Hz operation



Underwriters’ Laboratories Listed and Canadian Standards Association listed as Certified
SPECIFICATIONS

Features:




Frequency Response
30 Hz to 20,000 Hz, ±2 dB
Voltage Gain (at 1,000 Hz)
(Outputs terminated: line 600  microphone 150  mix
bus 3.3 k headphone 200 , tip-sleeve and ring-sleeve )
OUTPUT
Inp t
Input

Line

Microphone

Mix
Bus

91 dB

41 dB

24 dB

Line

40 dB

–9 dB

–27 dB

Mix Bus

55 dB

5 dB

––

Low-Impedance
Microphone (150 )

Inputs
IMPEDANCE
Input
Microphone

Line
Mix Bus

Designed
for Use
With

Actual
(Internal)

19 to 600


1 k

–32 dBV to
–5 dBV∗
(25 mV to 0.56 V)

Less
than10 k

66 k

+20 dBV

3.5 k

3.5 k

+7 dBV (2.2 V)

Input
Clipping Level

∗Depending on input control setting

Page 1 of 2

Printed in U.S.A.

MODEL M267 MICROPHONE MIXER
Outputs

Peak Indicator
Lights 6 dB below clipping or at onset of limiter action

IMPEDANCE
Designed for
Use With

Actual
(Internal)

Output
Clipping Level

Any low impedance microphone
input

0.5 W

–34 dB
(20 mV)

Mix Bus

3.5 kW

3.5 kW

–8 dBV
(400 mV)

Headphones

8 - 2000 W
200 W
recommended

400 W to
3 kW∗∗

+10 dBV
(3.3 V)

600 W

150 W

+18 dBm
(6.2 V)

Output
Microphone

Specification Sheet

Line

Headphone Output Clipping Level
3.16V (+10 dBV) into 200 W
Tone Oscillator
1,000 Hz, 1.5% or less THD
Phantom Power
30 Vdc open-circuit, 3.3 kW series resistance, input
switches in MIC position only
Operating Voltage
Ac Operation: 120 or 240 volts ±10%, 50/60 Hz, 9.5W,
internally switchable[

∗∗Depending on level control setting

Noise

Dc Operation: 27 volts nominal at 15 mA typical no-signal, 18 mA typical at 0 VU (+4 dBm) output with headphone load; 21.5 volts minimum

Equivalent Input Hum and Noise: –126 dBV (low impedance microphone, 150 W - 20-20,000 Hz) into a 600
W load at full gain
Output Noise: –75 dBV (master control fully counterclockwise), –53 dBV (master fully clockwise), (input controls down, 300-20,000 Hz)

Battery life: approximately 20 hours with alkaline batteries at +4 dBm output in continuous use; three 9-volt
batteries, type NEDA 1604A (Duracell MN1604 recommended)

Output Hum and Noise: –70 dBV (master control down),
–51 dBV (master control up) (input controls down,
20-20,000 Hz)

[ Supplied wired for 120 Vac operation (See Service section for 240
Vac operation)

Distortion

Temperature Range
Operating: –18o to 57o C (0o to 135o F)
Storage: –29o to 71oC (–20o to 160o F)

0.35% or less THD from 30 to 20,000 Hz at +15 dBm output; 0.5% or less IM distortion up to +15 dBm output level

Dimensions

Common Mode Rejection
65 dB minimum with input of –20 dBV at 100 Hz

See Figure 1

Control Interaction

229 mm
(9 in.)

309 mm
(12 5/32 in.)

Less than 1 dB with any control combination

68.8mm
(2 23/32 in.)

Overload and Shorting Protection
Shorting the outputs, even for prolonged periods, will cause
no damage; microphone inputs will not be damaged by signals up to 3 volts
Lo-Cut Filters

6.3 mm
(1/4 in. )

FIGURE 1
Weight

6 dB/octave rolloff at 150 Hz

Net:

Limiter
Threshold: +15 dBm (line output level; adjustable
from –4 to +18 dBm)
Attack Time:

Packaged: 3.2 kg (7 lb 2 oz)
Certifications

3 msec typical

Listed by Underwriters’ Laboratories, Inc., and listed by
Canadian Standards Association as Certified

Recovery Time: 500 msec typical

FOD NO. 09055
E1997, Shure Brothers Incorporated

2.3 kg (5 lb 2 oz)

Page 2 of 2

Printed in U.S.A.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 1998:01:07 16:28:35
Producer                        : Acrobat Distiller Daemon 3.01 for HP-UX A.09.01 and later (HPPA)
Author                          : walshd
Creator                         : Interleaf, Inc.
Title                           : Shure M267 Microphone Mixer
Modify Date                     : 1999:01:12 17:43:20
Subject                         : Specification Sheet
Page Count                      : 2
Has XFA                         : No
Page Layout                     : OneColumn
EXIF Metadata provided by EXIF.tools



Comentários

Este produto não recebeu nenhum comentário até o momento. Seja o primeiro(a) a enviar um comentário para este produto!


Formas de Pagamento
Cartões de Crédito | Boleto | Deposito

Institucional: Como Comprar | Depoimentos | Fale Conosco | Fale Conosco

2024 © --== SOM MEXE MUSIC LTDA ==--